Created on 06/16/2015

 2015 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2

MODEL

CNFC

Free flow nose to side check valve with bypass orifice

SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A

Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer

specified orifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.

TECHNICAL DATA

Maximum Operating Pressure 350 bar

Orifice Range 0,4 - 3,2 mm

Seal kit - Cartridge Buna: 990-203-007

Seal kit - Cartridge Viton: 990-203-006

(X)CONTROL

X Not Adjustable

(C)SETTING RANGE

C 30 psi (2 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)

A 4 psi (0,3 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)

B 15 psi (1 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)

D 50 psi (3,5 bar) Cracking Pressure, .016

- .127 in. (0,4 - 3,2 mm)

E 75 psi (5 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)

F 100 psi (7 bar) Cracking Pressure, .016 -

.127 in. (0,4 - 3,2 mm)

(N)SEAL MATERIAL

N Buna-N

V Viton

MATERIAL/COATING

Standard Material/Coating

/AP Stainless Steel, Passivated

snhy.com/CNFC

TECHNICAL FEATURES

Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.

Will accept 5000 psi (350 bar) at ports 1 and 2.

Valves with the opposite flow path (free flow from 2 to 1) are considered flow controls and may be found listed as fixed orifice, non-pressure compensated flow

control valve with reverse flow check.

The customer specified orifice diameter is stamped on one of the cartridge's hex faces.

Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION

section). For further details, please see the Materials of Construction page.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

Model Code Example: CNFCXCNCONFIGURATION OPTIONS